Loop Minimalist Wall Light
∅ 3.14″ x H 12.6″ / Dia 8cm x H 32cm / Copper / US plug
$140.00
Skip to product information
Loop Minimalist Wall Light
$140.00
30% OFF · HALLOWEEN30
Apply
$5 OFF
Spend $150+
$10 OFF
Spend $300+
$15 OFF
Spend $450+
Highest tier at checkout Highest tier only Details
The highest eligible extra saving is applied automatically: $5 at $150, $10 at $300, or $15 at $450 (USD).
Thresholds use the merchandise subtotal before discounts. Shipping and taxes are excluded.
Each customer may use the offer once.
The automatic tier saving can be combined with HALLOWEEN30.
Final savings are confirmed at checkout.
Shipping & Delivery
Shipping is available to selected destinations. Free Standard Shipping is offered only where it appears at checkout; other supported destinations receive calculated DHL Express and/or FedEx options.
Customers in South America and Africa should contact us for a custom shipping assessment and quotation.
Ordering multiple lights, oversized fixtures or project quantities—or looking for a cheaper or faster route? Contact us before checkout for a tailored shipping quotation.
A plug-in wall sconce — no electrician needed. A small copper-finished disk mounts to the wall with two screws; a black braided cord drapes through a brass loop above and ends in an E26/E27 bulb socket below. 78.7″ cord with built-in switch plug — install in 5 minutes anywhere with a wall outlet. Ships with one test bulb so you can light it up immediately on arrival.
✓ No electrician, no wiring, no permission needed
This is a true plug-in wall sconce. Two small wall-anchor screws hold the brass disk; the cord runs to any standard outlet via a switch plug. Renters, apartment dwellers, dorm rooms, and anyone who cannot modify wiring — this works for you. To uninstall (when you move out), unscrew the two anchors and patch two small holes.
Features
Plug-in install
5-minute mount with two screws + plug-in to wall outlet. No hardwiring, no junction box, no electrician.
Drape cord through loop
Black braided cord runs through a small brass loop above the disk — the loop holds the cord shape, the socket dangles at the bottom.
Test bulb included
Ships with one E26/E27 bulb pre-fitted for arrival testing. Swap to your preferred bulb anytime (LED, Edison filament, dimmable).
Finish
Copper (disk & loop) Black braided cord
Single finish only. The copper baked-paint coat over the brass hardware reads warm and matches walnut, leather, marble, and brick interiors.
Specifications
| Dimensions | Ø3.1″ disk × 12.6″ total height (8 × 32 cm) |
| Weight | ~2.2 lbs (1 kg) |
| Material | Copper-finished metal disk and loop · black braided cord · brass socket housing |
| Light source | E26 (NA & CA) or E27 (EU/AU) — max 40W. One test bulb included; LED bulbs recommended (sold separately for replacement) |
| Voltage | AC 110–240V (universal) |
| Mounting | Two screws into wall — anchors included. No hardwiring |
| Cord | 78.7″ (200 cm) with built-in switch plug; correct plug type ships per destination (NA/EU/AU/SA) |
| Control | Push-button switch on cord; dimming requires a dimmable bulb + a smart plug or switched dimmable outlet |
| Certification | North America, EU, Australia, Saudi Arabia |
| Warranty | 2 years on fixture and wiring |
Downloads & Resources
Spec Sheet Setup Guide
FAQs
Will my landlord/HOA have a problem with this?
No — it's a plug-in fixture, the same legal status as a floor lamp or table lamp. The only attachment to the wall is two small screws (about the size of a picture-hanging anchor); patching two holes on move-out takes 5 minutes. There's no electrical modification to the unit, so no permits or landlord approval are required for installation.
What bulb works best?
E26 socket — any standard LED or Edison bulb up to 40W. For the visible-filament look that suits the open socket, use a vintage-style Edison LED (ST64, G80, or G125 globe shape, 2700K, 4–6W). For a softer ambient glow, use a frosted A19 or G45 LED. The test bulb included is a basic warm-white LED — works on arrival, swap to your preferred style anytime.
Is it dimmable?
The cord has an on/off push switch only. To dim: install a dimmable LED bulb plus a smart plug (Lutron Caséta or TP-Link Kasa) — the bulb dims through the app or schedule. No rewiring needed.
Where can I install it — height, location?
The bulb hangs about 6″ below the mount point, so mount the disk approximately 54″ above the floor for a standard bedside-reading height. For above-couch ambient lighting, mount 60″ above the seat. Distance to the wall outlet matters too — the 78.7″ cord gives ~6.5 ft of reach, including some slack. Indoor dry locations only (not bathrooms or kitchens above stovetops).
What's the warranty?