Square Frame LED Sconce
∅ 12.6″ × H 12.6″ / Brushed satin nickel / Warm Light
$245.00
Skip to product information
Square Frame LED Sconce
$245.00
30% OFF · HALLOWEEN30
Apply
$5 OFF
Spend $150+
$10 OFF
Spend $300+
$15 OFF
Spend $450+
Highest tier at checkout Highest tier only Details
The highest eligible extra saving is applied automatically: $5 at $150, $10 at $300, or $15 at $450 (USD).
Thresholds use the merchandise subtotal before discounts. Shipping and taxes are excluded.
Each customer may use the offer once.
The automatic tier saving can be combined with HALLOWEEN30.
Final savings are confirmed at checkout.
Shipping & Delivery
Shipping is available to selected destinations. Free Standard Shipping is offered only where it appears at checkout; other supported destinations receive calculated DHL Express and/or FedEx options.
Customers in South America and Africa should contact us for a custom shipping assessment and quotation.
Ordering multiple lights, oversized fixtures or project quantities—or looking for a cheaper or faster route? Contact us before checkout for a tailored shipping quotation.
A square frame LED sconce — a brushed satin-nickel square panel with a fluted acrylic disc at its center that glows warm from an integrated LED, framed by crossed metal rods that extend past each corner. A clean modern-geometric wall light. 12.6″ × 12.6″ × 2″ deep, integrated LED. For hallways, living rooms, stairwells, and entryway accent walls.
Features
Fluted glow disc
A ribbed acrylic disc diffuses an integrated LED into a soft radiant circle of warm light.
Crossed-rod frame
Brushed satin-nickel rods cross at each corner and extend past the panel for a layered architectural edge.
Integrated LED
Built-in LED in 2700K warm white, no bulb to change. AC 110–240V universal.
Finish & diffuser
The frame and panel are stainless steel in a brushed satin-nickel finish — durable, corrosion-resistant, and consistent piece to piece. The center disc is fluted acrylic, which diffuses the LED evenly without a visible hotspot.
Dimensions
12.6″ × 12.6″ (32 × 32 cm) · 2″ (5 cm) deep. Click the diagram to enlarge.
Click to enlarge ↗
Specifications
| Material | Stainless Steel, Acrylic |
| Body finish | Brushed satin nickel |
| Shade finish | Frosted fluted acrylic |
| Dimensions | 12.6″ × 12.6″ × 2″ deep (32 × 32 × 5 cm) |
| Light source | Integrated LED · 2700K warm white · dimmable |
| LED service | LED replaceable at authorized service |
| Voltage | AC 110–240V (universal) |
| Mounting | Hardwired wall mount, US junction box compatible |
| Moisture rating | IP20 — indoor, dry locations only |
| Control | Compatible with standard wall switch or dimmer (not included) |
| Certification | Listed · North America · CE · SAA · SASO · KC |
Installation Notes
- Hardwired wall install — a licensed electrician is recommended. Mounts over a standard US junction box behind the panel.
- Mount the square level so the crossed rods read true horizontal and vertical; check with a level before final tightening.
- The LED is integrated; end-of-life replacement is handled at authorized service — contact us with your order number rather than replacing the whole fixture.
- Dimmable with a compatible wall dimmer (not included).
- The brushed satin-nickel finish wipes clean with a soft dry or barely damp cloth; avoid abrasive pads that can dull the brushed grain.
- Indoor dry locations only (IP20). Keep clear of direct water and damp areas.
Downloads & Resources
Spec Sheet Installation Guide Request 3D Files
FAQs
What is the center disc made of — is it glass?
It's fluted acrylic, not glass. The ribbed acrylic diffuses the integrated LED into an even, radiant circle of light without a visible hotspot, and it's lighter and more shatter-resistant than glass. The frame and panel are stainless steel in a brushed satin-nickel finish.
Is the LED replaceable?
The LED is integrated and rated over 30,000 hours — roughly 25 years at 3 hours of daily use. It isn't a user-swappable bulb; if it fails within or after the warranty period, contact authorized service with your order number for a replacement LED module rather than replacing the whole fixture.
Is it dimmable, and how bright is it?
Yes — the integrated LED is 2700K warm white and dimmable with a compatible wall dimmer (not included). It gives a soft ambient and accent glow rather than bright task light, so it works well in hallways, beside art, or as a living-room accent.
Can I mount it horizontally or only as a square?
It's a square, so it reads the same in any 90° rotation — the crossed-rod frame and center disc stay symmetrical. Just mount it level so the rods line up true horizontal and vertical.
Can I install it in a bathroom, and what's the warranty?