Louver Floor Lamp
Ø 18.9″ x H 65″ / Black & White / US Plug
$1,250.00
Skip to product information
Louver Floor Lamp
$1,250.00
30% OFF · HALLOWEEN30
Apply
$5 OFF
Spend $150+
$10 OFF
Spend $300+
$15 OFF
Spend $450+
Highest tier at checkout Highest tier only Details
The highest eligible extra saving is applied automatically: $5 at $150, $10 at $300, or $15 at $450 (USD).
Thresholds use the merchandise subtotal before discounts. Shipping and taxes are excluded.
Each customer may use the offer once.
The automatic tier saving can be combined with HALLOWEEN30.
Final savings are confirmed at checkout.
Shipping & Delivery
Shipping is available to selected destinations. Free Standard Shipping is offered only where it appears at checkout; other supported destinations receive calculated DHL Express and/or FedEx options.
Customers in South America and Africa should contact us for a custom shipping assessment and quotation.
Ordering multiple lights, oversized fixtures or project quantities—or looking for a cheaper or faster route? Contact us before checkout for a tailored shipping quotation.
A mid-century floor lamp with a hand-riveted louvered steel shade that washes light upward and filters it softly down through the slats — ambient and glare-free at once. The white shade sits on a slim carbon-steel stem wrapped in hand-stitched leather, finished with a brass collar, over a weighted disc base. At 65″ tall it reads as a quiet sculptural piece beside a sofa, in a study, or in a bedroom reading corner.
Features
Up & down light
The open shade throws light at the ceiling while the slats release a soft glow below — layered, low-glare ambient light.
Louvered steel shade
Concentric strips of white-painted steel, hand-riveted into a fanned cone that diffuses the bulbs evenly.
Leather-wrapped stem
Carbon-steel pole wrapped in hand-stitched leather with a brass neck collar and twin pull-chain switches.
Standard screw-base LED — bulbs replaceable
Uses two E27 screw-base LED bulbs (not included). Warm-white suits a cozy room; pair dimmable bulbs with a compatible plug-in dimmer to set the level. Runs on universal AC 110–240V; just confirm the bulb base for your region.
Dimensions & Finish
One finish: white shade · black stem · brass collar · 🔍 tap to enlarge
Specifications
| Style | Mid-century / modern / minimalist |
| Material | Carbon steel + metal hardware + hand-stitched leather |
| Finish | Dust-free baked enamel (powder-coat) |
| Shade width | 18.9″ (480 mm) |
| Height | 65″ (1650 mm) |
| Bulbs | 2 × E27 screw-base LED, not included |
| Switch | Twin pull-chain switches |
| Voltage | AC 110–240V (universal) |
| Certification | North America Listed · CE · SAA · SASO · KC |
| Best for | Living room, study / home office, bedroom |
Setup & Use Notes
- Thread the stem sections into the weighted base, then seat the louvered shade onto the neck collar.
- Fit two E27 LED bulbs before standing the lamp upright; operate each light with its own pull-chain.
- Place it in a corner or beside a sofa where the upward light can reach the ceiling for the best ambient effect.
- Dust the shade slats with a soft dry brush; wipe the leather and base with a barely-damp cloth.
Downloads & Resources
⬇ Spec sheet ✉ Ask a question
FAQ
What bulbs does this mid-century floor lamp use?
Two E27 screw-base LED bulbs (not included), one per pull-chain. Warm-white looks best in living and bedroom spaces; for adjustable brightness use dimmable bulbs with a compatible dimmer. It runs on universal AC 110–240V; just confirm the bulb base for your region.
How does the louvered shade light a room?
The open top sends light up to the ceiling for soft ambient fill, while the slatted sides release a gentle downward glow — layered, low-glare light rather than one harsh beam.
How tall is it and where does it fit?
It stands 65″ (1650 mm) tall with an 18.9″ (480 mm) shade. It suits a living room beside a sofa, a study or home office, or a bedroom reading corner, and works well in a corner.
Is assembly required?
Light assembly only: join the stem to the weighted base, seat the shade on the neck collar, and fit the two bulbs. No special tools are needed and it takes a few minutes.
What is the stem made of, and how do I care for it?