Pebble-Inlay Sculptural Plaster Table Lamp
Highest tier at checkout Highest tier only Details
The highest eligible extra saving is applied automatically: $5 at $150, $10 at $300, or $15 at $450 (USD).
Thresholds use the merchandise subtotal before discounts. Shipping and taxes are excluded.
Each customer may use the offer once.
The automatic tier saving can be combined with HALLOWEEN30.
Final savings are confirmed at checkout.
Shipping & Delivery
Shipping is available to selected destinations. Free Standard Shipping is offered only where it appears at checkout; other supported destinations receive calculated DHL Express and/or FedEx options.
Customers in South America and Africa should contact us for a custom shipping assessment and quotation.
Ordering multiple lights, oversized fixtures or project quantities—or looking for a cheaper or faster route? Contact us before checkout for a tailored shipping quotation.
A sculptural plaster table lamp with an asymmetric, hand-formed body set with charcoal pebble insets, topped by a pleated dome shade. The cast gypsum-resin base reads like hand-thrown stoneware and casts a warm, low glow. Standing 16.9–21.3″ tall, it works as an accent lamp on a living-room console, entryway table, or bedroom dresser. Size and finish are made to order.
Hand-formed organic body
Asymmetric gypsum-resin form with inset charcoal pebble detailing and a matte plaster surface.
E26/E27, max 12W
Standard medium-base socket. Warm 2700K LED recommended for a soft, low glow.
Made-to-order sizing
Three heights from 16.9 to 21.3″; custom base and shade finishes on request.
Pebble-inlay base detail
Default configuration
Pictured: mid height (19.3″), off-white plaster body with charcoal pebble insets and a pleated off-white dome shade.
Custom size & finish
| Size | Height (overall) | Shade Dimensions | Best for |
|---|---|---|---|
| Small | 16.9″ (43 cm) | Ø 15.7″ (40 cm) | Nightstand, narrow shelf |
| Medium | 19.3″ (49 cm) | Ø 17.7″ (45 cm) | Console, dresser, end table |
| Large | 21.3″ (54 cm) | Ø 19.7″ (50 cm) | Entryway, statement corner |
Shade diameter 15.7–19.7″ (40–50 cm). All sizes made to order; intermediate sizes available on request.
| Material | Cast gypsum-resin composite body · metal hardware |
| Finish | Off-white matte plaster with inset charcoal pebble detail |
| Shade | Pleated dome shade, off-white textured fabric-look |
| Light source | E26/E27 medium base — LED or incandescent, max 12W (bulb not included) |
| Voltage | AC 110–240V |
| Switch | Inline cord switch |
| Mounting | Freestanding tabletop (plug-in) |
| Dimensions | H 16.9–21.3″ (43–54 cm) · shade Ø 15.7–19.7″ (40–50 cm) |
| Customization | Three heights; custom base & shade finish made to order |
| Certification | Certified for North America, EU, and Australia |
| Prop 65 (CA) | WARNING applies for California — see P65Warnings.ca.gov |
- Lift by the base, not the shade; the pleated dome is sculpted, not load-bearing.
- Plug-in lamp — no hardwiring. Operates from a standard wall outlet via the inline cord switch.
- Bulb not included. Use an E26/E27 LED rated 12W or less; 2700K warm white best matches the matte plaster tone.
- Set on a stable, level surface. The weighted gypsum-resin base resists tipping.
- Each piece is hand-finished — brushwork, texture, and tone vary slightly from unit to unit. This is characteristic of the process, not a defect.
- Dust with a dry, soft cloth. Avoid water, solvents, and abrasive cleaners on the plaster finish.
Is one bulb bright enough for a living room?
It takes a single E26/E27 bulb (max 12W) and is built as accent and ambient lighting, not a room’s main source. Pair it with overhead or a second lamp for full living-room coverage.
What height should I pick for a console or nightstand?
For a nightstand or narrow shelf choose 16.9″. For a console, dresser, or end table the 19.3″ mid height suits most setups. The 21.3″ large reads as a corner statement.
Can I change the base tone or pebble color?
Does it need assembly or an electrician?
No. It ships ready to use as a plug-in lamp with an inline cord switch — just add an E26/E27 bulb and plug into a standard outlet.
What’s the warranty and how do I clean it?