$450.00 $850.00

Size∅ 3.1″ × H 13″

Colour Brass & White Glass Brushed nickel & White Glass Matte black & White Glass Brass & White Alabaster Brushed nickel & White Alabaster Matte black & White Alabaster

Shipping is available to selected destinations. Free Standard Shipping is offered only where it appears at checkout; other supported destinations receive calculated DHL Express and/or FedEx options.

Customers in South America and Africa should contact us for a custom shipping assessment and quotation.

Ordering multiple lights, oversized fixtures or project quantities—or looking for a cheaper or faster route? Contact us before checkout for a tailored shipping quotation.

View the full Shipping Policy

A slim vertical tube of natural alabaster or clear glass, cradled by a metal bracket on a compact backplate — two G9 bulbs glow softly through the shade from inside. 3.1″ × 13″ (8 × 33 cm), only 4.5 cm deep. Pick stone or glass, then brass, brushed nickel, or matte black. For hallways, bedside, dining-room walls, or flanking a mirror.

Stone or glass tube

Natural alabaster for a warm diffused glow, or clear glass for a crisper light.

Three metal finishes

Slim metal bracket and backplate in brass, brushed nickel, or matte black.

Two G9 bulbs

Two G9 sockets light the tube from each end — pick LED bulbs for low heat.

Six Combinations

Shade	Finish	Best for
Natural alabaster	Brass	Warm woods, cream walls, classic
Natural alabaster	Brushed nickel	White marble, cool greys, coastal
Natural alabaster	Matte black	High contrast modern interiors
Clear glass	Brass	Modern eclectic, brighter accent
Clear glass	Brushed nickel	Minimalist, vanity, coastal
Clear glass	Matte black	Industrial, gallery walls

Material	Brass, with natural alabaster or clear glass shade
Shade	Natural alabaster or clear glass (choose at checkout)
Finish	Brass, brushed nickel, or matte black (choose at checkout)
Light source	2 × G9 base · max 40W per socket (LED bulbs recommended)
Light color	Warm white (pick bulb temperature to taste)
Size	D 8 × H 33 cm / 3.1″ × 13″; backplate 8 × 7 cm; projection 4.5 cm
Power	AC 110–240V, IP20 indoor/dry
Mounting	Hardwired over a standard junction box

Dimensions

Click to enlarge ↗

Natural alabaster — each shade is one of a kind

Installation & Care

Hardwired over a standard junction box — a licensed electrician is recommended. Bulbs not included.
Mounts vertically as shown. Install in pairs to flank a mirror, headboard, or art; allow 24–30″ between the two centers for symmetry.
Use two G9 bulbs, max 40W each. We recommend LED bulbs — much cooler than halogen, important next to a stone or glass shade.
Indoor and dry locations only (IP20). Safe in damp vanity areas away from shower spray; not rated for wet zones.
The alabaster shade is softer than marble and can chip if dropped — handle gently during install. Dust with a dry, soft cloth; no water or solvents on the stone. Clear glass shade can be wiped with a damp cloth and dried.

Downloads & Resources

Spec Sheet

FAQs

Alabaster or glass — which should I pick?

Alabaster diffuses light through natural stone for a warm, soft glow — and each tube is one of a kind. Clear glass gives a brighter, crisper light and reads more minimal. Match alabaster to warm, layered interiors; glass to modern or industrial rooms.

Which finish should I pick?

Brass pairs warmly with wood, cream, and classic interiors. Brushed nickel reads cooler — good with marble, greys, or coastal palettes. Matte black gives high contrast against light walls. Pair two sconces of the same finish for symmetry.

What bulbs does it take?

Two G9 base bulbs, max 40W each (or LED equivalent), not included. We recommend a warm-white LED G9 — soft glow, low heat. Skip halogen G9 if the shade is alabaster.

Can I use it in a bathroom?

In dry or damp areas only — beside a vanity mirror, away from shower or tub spray. The sconce is IP20 (indoor/dry), not waterproof. Confirm your local code before installing in a bathroom.

How fragile is the alabaster?