$100.00 $250.00

L'expédition est disponible vers certaines destinations. La livraison standard gratuite n'est offerte que si elle apparaît lors du paiement ; les autres destinations prises en charge reçoivent des options DHL Express et/ou FedEx calculées.

Les clients d'Amérique du Sud et d'Afrique doivent nous contacter pour une évaluation et un devis d'expédition personnalisés.

Vous commandez plusieurs luminaires, des fixations surdimensionnées ou des quantités pour un projet — ou vous recherchez une option moins chère ou plus rapide ? Contactez-nous avant de passer commande pour un devis d'expédition personnalisé.

Consulter la politique d'expédition complète

A walnut-wood wall sconce that magnetically detaches into a portable handheld light. The lamp body lifts off the wall plate with a gentle pull — use it as a fixed sconce when mounted, or carry it as a wand for late-night hallways, closets, or bedside reading. Battery-powered with USB-C charging and 4-hour runtime. Touch sensor on the wood handle switches between three color temperatures (3000K / 4000K / 6000K) and dims by hold. No wiring, no electrician — mount the plate with screws or adhesive.

⚠ What this lamp is — and what it isn't

Ambient and accent light, not main illumination. The integrated 1W LED produces nightlight-to-low-ambient brightness — bright enough to navigate a dark hallway, find your way to the bathroom, or set evening mood, but not bright enough to read a book by alone.

For reading, pair it with a primary reading lamp. For mood lighting, ambient hallway use, or as a portable emergency light, this is its purpose.

Features

Magnetic detach

Pull the wand off the wall plate at any time — carry it to bed, hallway, or closet. Snaps back into place with a satisfying click.

USB-C rechargeable

4-hour runtime per charge. Charges from any USB port — power bank, laptop, or wall adapter. Cable included.

3 color temperatures + dim

Tap the wood handle to cycle between 3000K warm, 4000K neutral, and 6000K cool. Hold to dim.

Where it works best

Hallway nightlight Late-night bathroom trips, sleeping pets, kids' rooms

Closet interior Stick to closet door — no wiring through cabinetry

Bedside accent Wall-mounted above a nightstand; detach for handheld use

Rental-friendly Adhesive mount option leaves no holes; takes 5 minutes to install

Stairway / entryway Two together for symmetric ambient light without wired conduit

Emergency backup Always charged on the wall; grab during power outage

Configuration

Touch control on the wood handle

Single tap = on/off. Double tap = cycle color temperature. Long press = dim from 100% down to 10%.

Mount: screw or adhesive

Wall plate mounts with 2 screws (drywall anchors included) or via 3M VHB adhesive strip (included). Adhesive holds 1+ lb.

Finish

Walnut wood Light wood White diffuser (fixed)

Specifications

Dimensions	Ø1.0″ × 7.1″ tall (2.5 × 18 cm) · wall plate Ø3.5″
Material	Walnut or light wood handle and wall plate · metal internal frame · frosted acrylic diffuser
Light source	Integrated LED — 1W, ~80 lumens
Color temperature	3000K warm · 4000K neutral · 6000K cool — switchable via touch
Battery	Built-in rechargeable lithium-ion · ~4-hour runtime per charge
Charging	USB-C (cable included) — ~2.5 hours to full charge
Mounting	Screws (drywall anchors included) or 3M VHB adhesive (included)
Control	Touch sensor on the wood handle — tap, double-tap, hold
Body finish	Walnut wood (dark) or Light wood — choose at checkout
Certification	Certified for North America, EU, Australia, and Saudi Arabia
Warranty	1 year on battery · 2 years on LED and fixture

Setup & Use

Screw mount: Hold the wall plate where you want it, mark the two screw points with a pencil, drill pilot holes, install drywall anchors if needed, then screw the plate to the wall. Snap the lamp onto the magnet.
Adhesive mount: Clean the wall with isopropyl alcohol, peel the backing from the 3M VHB strip on the plate, press firmly for 30 seconds. Wait 2 hours before attaching the lamp.
Charge for 2.5 hours before first use. Subsequent charges take similar time. Keep charged for emergency-light reliability.
Indoor dry locations only. Not for bathrooms with direct shower spray or outdoor use.

FAQs

How long does the battery last and what's the charging time?

~4 hours of runtime at full brightness on a single charge. Dimming extends runtime significantly — at 25% brightness, expect 12+ hours. Charging from empty takes ~2.5 hours via USB-C from any standard USB-A or USB-C port (5V/1A or higher).

Will the adhesive hold over time?

The included 3M VHB adhesive holds 1+ lb of pull weight on clean, smooth surfaces (painted drywall, painted wood, tile). It will not hold on textured wallpaper, rough plaster, or unpainted brick. For long-term peace of mind on a critical mount, use the screw option instead.

Can the battery be replaced when it eventually wears out?

Is it bright enough for reading?

No — at 1W (~80 lumens) it's ambient/nightlight level, not task-bright. For comparison: a typical reading lamp is 8–15W LED (~400–800 lumens). Use the Nomad for mood lighting, nightstand accent, hallway navigation, and as a portable backup; pair with a primary reading lamp for reading.

What's the warranty?