Aura Melt Wall Sconce
∅ 5.8″ x H 5.7″ / White
Sale price
$125.00
Regular price $250.00
Skip to product information
Lime Green
White
Deep Red
Click to enlarge ↗
Click to enlarge ↗
Aura Melt Wall Sconce
Sale price
$125.00
Regular price $250.00
Shipping & Delivery
Shipping is available to selected destinations. Free Standard Shipping is offered only where it appears at checkout; other supported destinations receive calculated DHL Express and/or FedEx options.
Customers in South America and Africa should contact us for a custom shipping assessment and quotation.
Ordering multiple lights, oversized fixtures or project quantities—or looking for a cheaper or faster route? Contact us before checkout for a tailored shipping quotation.
Aura Melt — Resin Globe Wall Sconce, Two Sizes
A cast resin globe — its silhouette pinched and pulled downward like a droplet that stopped mid-fall — mounts flush to the wall with a compact metal backplate. The G9 socket sits deep inside the cavity; when lit, warm light radiates outward through the translucent body, shifting from a bright yellow core at the center to the shell's own color — lime-green, white, or deep red — at the outer edge. Both the compact 5.7″ and the taller 10.1″ version share the same 5.8″ diameter, making them easy to pair in an asymmetric wall grouping above a console, in a powder room, or along a staircase wall.
Available Colors
Each color is cast from translucent resin — the hue reads subtly when unlit and intensifies significantly once the G9 is switched on. Screen colors may vary from the physical piece.
Design Details
Gradient Glow Core
G9 light diffuses through the resin — bright yellow at center, full body color at the rim.
Sculptural Drip Form
Cast resin molded into a pulled-droplet silhouette — reads as sculpture off and as glow on.
Shared 5.8″ Footprint
Both sizes share one diameter — mix short and tall for a layered asymmetric wall grouping.
Sizes
Small
Ø 14.7 cm × H 14.5 cm
∅ 5.8″ × H 5.7″
Click to enlarge ↗
Compact accent — bedside wall, narrow hallway, or powder room vanity.
Large
Ø 14.7 cm × H 25.6 cm
∅ 5.8″ × H 10.1″
Click to enlarge ↗
Taller drip form — stronger vertical presence on an open or gallery wall.
Pairing note: Because both sizes share the same 5.8″ diameter, they visually belong to the same family when mounted together. An asymmetric arrangement — one small set 8–10″ higher than one large — creates a balanced, intentional composition rather than a mismatched look.
Bulb
G9 LED Capsule — Bulb Not Included
Compatible with standard G9 LED bulbs. Avoid halogen G9s above 20W — sustained heat at close range can stress the resin body over extended use.
Specifications
| Material | Translucent resin body, metal hardware |
| Light Source | G9 LED (bulb not included) |
| Voltage | AC 110–240V, 50/60Hz |
| Wiring | Hardwired (electrician required) |
| Mounting | Wall-mounted, flush backplate |
| Size — Small | Ø 14.7 cm × H 14.5 cm / ∅ 5.8″ × H 5.7″ |
| Size — Large | Ø 14.7 cm × H 25.6 cm / ∅ 5.8″ × H 10.1″ |
| Colors | Lime Green · White · Deep Red |
| Control | Compatible with standard wall switch (not included) |
| Environment | Indoor use only |
| Certifications | North America · Saudi Arabia · Europe · Australia |
Downloads
Common Questions
Does the Aura Melt require an electrician to install?
Yes — the Aura Melt is hardwired directly into your wall circuit, so a licensed electrician is required. There is no plug or cord. The metal backplate covers a standard wall junction box; your electrician connects the lamp's lead wires to your existing circuit. Installation typically takes under 30 minutes once the wiring is in place.
What G9 bulb should I use, and where can I find one?
Use a G9 LED capsule — 3–5W, 2700–3000K warm white. A frosted G9 produces a softer, even glow through the resin; a clear vintage-filament G9 creates a brighter yellow hot spot at the core if you prefer a more dramatic gradient effect. Avoid halogen G9s above 20W, as the heat can stress the resin shell over time. G9 LEDs are widely available at Home Depot, Lowe's, or on Amazon.
Does the color look the same when the light is off versus on?
No — and that's part of the design. When unlit, the resin body reads as a translucent colored globe with a subtly frosted surface. When lit, the G9 filament illuminates the interior and the warm yellow light radiates outward through the body, creating a visible gradient from bright warm yellow at the core to the shell's own color at the outer edge. The lit appearance is significantly more vivid than the unlit state.
Can I use both sizes together on the same wall?
Yes — because both sizes share the same 5.8″ diameter, they read as a coherent pair when mounted together. An asymmetric arrangement works particularly well: mount the smaller one 8–10 inches higher than the larger one, with a 12–16 inch horizontal gap between them. Same colorway keeps it cohesive; contrasting colors (e.g., lime-green small + deep red large) creates a bolder, more graphic statement.
Is the Aura Melt certified for use in North America?
Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide.
Sizing & questions
Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs.
What size should I choose—the 5.7″ or 10.1″?+
The compact 5.7″ suits bedside walls, narrow hallways, or powder room vanities. The 10.1″ version creates stronger vertical presence on open or gallery walls. Both share the same 5.8″ diameter, so they pair beautifully in asymmetric arrangements—mount one 8–10″ higher than the other for balanced composition.
How does the color change when lit versus unlit?+
Unlit, the resin reads as subtle translucent hue. When switched on, the G9 LED creates a bright yellow core that radiates outward, intensifying the shell's full color—lime green, white, or deep red—at the rim. The gradient effect is part of the design's visual magic.
Do I need an electrician to install this?+
Yes. The Aura Melt is hardwired directly into your wall circuit—no plug or cord. A licensed electrician connects the lead wires to your existing circuit via the metal backplate covering a standard junction box. Installation typically takes under 30 minutes.
What G9 bulb should I use?+
Use a G9 LED capsule (3–5W, 2700–3000K warm white). A frosted bulb produces even glow; a clear vintage-filament G9 creates a brighter yellow hot spot for dramatic effect. Avoid halogen G9s above 20W—sustained heat can stress the resin body over extended use.